Reinstall the system after 10 strokes and techniques to avoid poisoning
Optimization For Customer
2009-11-10 11:32:27
After re-installing the operating system, due to security settings and patches not timely installation problems, the most easily lead to the gross invasion of the virus, so some essential complementary measures are critical, "" in "the new system most vulnerable to poisoning re-install a new system to do 10 events, "a paper presented 10 recommendations, it is worth everybody's reference.
The first major one: Do not hurry access network
After Windows installation is complete, do not immediately access the network server, because when the server has not marked with a variety of patches, there are all kinds of loopholes, very susceptible to viruses and invasion. At this point would like to add after the blast and shock wave patch and re-start the re-connected in the internet.
The first two events: the system patching / installing anti-virus software
Needless to say, Blaster and Sasser virus patch is on it is absolutely necessary, if you install Windows XP SP2 will no longer need to be installed separately.
After installing the system, be sure to install anti-virus software, while its update to the latest version.
7 things: Enable Advanced Power Management
Sometimes, before installing Windows XP does not open BIOS will find the power in the high-level power control, install Windows XP, shut down Windows, the power does not automatically disconnect. At this time, many people choose to re-open the BIOS in the high-level power control, and re-install Windows XP. In fact, do not need to be too much trouble, as long as you confirm that you have open in the BIOS advanced power control options, and select ACPI Pc, must not be wrong, or may not be able to enter after restarting Windows, and restart your computer, the computer may be re - Search and automatically re-install the computer hardware, then you can make it to support advanced power control.
The first eight events: the abolition of the compressed folder support
Click Start Run, type "regsvr32 / u zipfldr.dll" carriage return, there prompt window "zipfldr.dll in the Dll UnrgisterServer success" can cancel the compressed folder that Windows XP support. In addition, the type regsvr32 shdocvw.dll may cancel the "Picture and Fax" and the associated image file.
The first nine events: the abolition of "insufficient disk space" notification
When the disk drive capacity is less than 200MB when Windows XP will be issued by "insufficient disk space" notification, very annoying. Can open the "Registry Editor", navigate to the HKEY_CURRENT_USERSoftwareMi crosoftWindowsCurrentVersionPolicies Explorer, in the "Explorer" on the right-click, choose the context menu on the "New" "DWORD value", this value is named "NoLowDiskSpaceChecks", pairs of This value will hit one of the "Value data" set to "1."
The first 10 events: the opening code
After installing SP2, most users find that access to certain areas are required to complete a verification code, all code can not display images (shown as a small red cross), which is a very serious Bug. The solution is: Run "Regedit" command to open the Registry Editor, navigate to the order "[HKEY_ LOCAL_MACHINESOFTWAREMicrosoftInternet Explorer Security]", a new one on the right of the window called "BlockXBM" The REG_ DWORD value, its value is set to "0" (hexadecimal value).
The first three events: turn off System Restore
System Restore is a Windows ME and Windows XP, Windows 2003 has a feature, it allows us to bring the system back to a time of state, and thus prevent us to re-install the operating system. However, some people in the implementation of System Restore, it is found except C drive, the other of the D drive, E drive is restored to its previous state, and the results were not inside the saved file, and causing serious damage!
This is because the System Restore default is for the purposes of all partitions on your hard disk, so that once an System Restore operation, then all partitions of the data will be restored. Therefore, we must press Win + Break key, and then click "System Restore" tab, cancel "on all drives off System Restore" option, then select the D drive, click the "Settings" button, open the window select "Turn off the drive System Restore" option.
Turn the other disk can be on the System Restore off. In this way, once the system unstable, can use the System Restore tool to restore the C drive on the system, but while other files on the disk are not something happens.
The first four events: to the Administrator password
branded
Some people may be using a downloaded version of the Universal Ghost to install the system, it may be using a Windows XP unattended installation CD to install the system, the use of these methods is very likely installation did not let you specify the Administrator password, or the Administrator's password is the default 123456 or simply empty. This password is very dangerous and, therefore, in the installed system, please right-click "My Computer", select "Manage" and then select the left side of the "Computer Management (Local) System Tools Local Users and Groups user ", select the right window of the Administrator, right-click and select" Set Password. "
In the Open window, click "Continue" button, you can open the window for the Administrator password.
In addition, select "new user", set your username and password, and then double-click the new user, click the "subordinate" label, will in which all groups (if any) are selected, click the bottom of the "delete" button. And then click "Add" button, and then in the Open window, click the "Advanced" button, and then click "Find Now" button, find the PowerUser or User Group, click "OK" twice, and add the user PowerUser or User Group. Off the current user, and then the new user logs on can find the system much faster.
5 things: turn off the default shared
Windows installed, will create a number of hidden share, mainly for administrators to remotely log management systems to use, but for individual users, this rarely used, nor is it very safe. Therefore, we need to cut off this sharing: first in the d: the next new one disshare.bat file in which to write the following statement:
@ echo off
net share C $ / del
net share d $ / del
netshare ipc $ / del
net share admin $ / del
Next? Will be d: disshare.bat copied to the C: WINDOWSSystem32GroupPolicyUserScriptsLogon folder. And then press Win + R, type gpedit.msc, open window, expand "User Configuration Windows Settings Scripts (Logon / Logoff)" folder in the right pane, double-click the "Login", and in the shells out of the window, click the "Add" command, select the C: WINDOWSSystem32GroupPolicyUserScriptsLogon under disshare.bat file folder.
After completion of the settings, restart the system, will automatically cut off the Windows XP default shared channel, and if you have more hard drives, please net share d $ / del, under its own to add, such as the net share e $ / del, net share f $ / del, etc..
The first six events: Enable DMA transfer mode
Enable DMA mode, computer peripheral equipment (mainly referring to hard disk) can exchange data directly with memory, this can speed up the hard disk read and write speeds, higher data transfer rate: Open the "Device Manager", which "IDE ATA / ATAPI Controllers" under the "primary IDE channel" and "Secondary IDE channel", double-click the, click the "Advanced Settings", the dialog box lists the current IDE interface to connect the device transfer mode, click the List button on the "Transfer Mode "is set to" DMA (if available). " Restart the computer to take effect.
????????????????????
The first major one: Do not hurry access network
After Windows installation is complete, do not immediately access the network server, because when the server has not marked with a variety of patches, there are all kinds of loopholes, very susceptible to viruses and invasion. At this point would like to add after the blast and shock wave patch and re-start the re-connected in the internet.
The first two events: the system patching / installing anti-virus software
Needless to say, Blaster and Sasser virus patch is on it is absolutely necessary, if you install Windows XP SP2 will no longer need to be installed separately.
After installing the system, be sure to install anti-virus software, while its update to the latest version.
7 things: Enable Advanced Power Management
Sometimes, before installing Windows XP does not open BIOS will find the power in the high-level power control, install Windows XP, shut down Windows, the power does not automatically disconnect. At this time, many people choose to re-open the BIOS in the high-level power control, and re-install Windows XP. In fact, do not need to be too much trouble, as long as you confirm that you have open in the BIOS advanced power control options, and select ACPI Pc, must not be wrong, or may not be able to enter after restarting Windows, and restart your computer, the computer may be re - Search and automatically re-install the computer hardware, then you can make it to support advanced power control.
The first eight events: the abolition of the compressed folder support
Click Start Run, type "regsvr32 / u zipfldr.dll" carriage return, there prompt window "zipfldr.dll in the Dll UnrgisterServer success" can cancel the compressed folder that Windows XP support. In addition, the type regsvr32 shdocvw.dll may cancel the "Picture and Fax" and the associated image file.
The first nine events: the abolition of "insufficient disk space" notification
When the disk drive capacity is less than 200MB when Windows XP will be issued by "insufficient disk space" notification, very annoying. Can open the "Registry Editor", navigate to the HKEY_CURRENT_USERSoftwareMi crosoftWindowsCurrentVersionPolicies Explorer, in the "Explorer" on the right-click, choose the context menu on the "New" "DWORD value", this value is named "NoLowDiskSpaceChecks", pairs of This value will hit one of the "Value data" set to "1."
The first 10 events: the opening code
After installing SP2, most users find that access to certain areas are required to complete a verification code, all code can not display images (shown as a small red cross), which is a very serious Bug. The solution is: Run "Regedit" command to open the Registry Editor, navigate to the order "[HKEY_ LOCAL_MACHINESOFTWAREMicrosoftInternet Explorer Security]", a new one on the right of the window called "BlockXBM" The REG_ DWORD value, its value is set to "0" (hexadecimal value).
The first three events: turn off System Restore
System Restore is a Windows ME and Windows XP, Windows 2003 has a feature, it allows us to bring the system back to a time of state, and thus prevent us to re-install the operating system. However, some people in the implementation of System Restore, it is found except C drive, the other of the D drive, E drive is restored to its previous state, and the results were not inside the saved file, and causing serious damage!
This is because the System Restore default is for the purposes of all partitions on your hard disk, so that once an System Restore operation, then all partitions of the data will be restored. Therefore, we must press Win + Break key, and then click "System Restore" tab, cancel "on all drives off System Restore" option, then select the D drive, click the "Settings" button, open the window select "Turn off the drive System Restore" option.
Turn the other disk can be on the System Restore off. In this way, once the system unstable, can use the System Restore tool to restore the C drive on the system, but while other files on the disk are not something happens.
The first four events: to the Administrator password
branded
Some people may be using a downloaded version of the Universal Ghost to install the system, it may be using a Windows XP unattended installation CD to install the system, the use of these methods is very likely installation did not let you specify the Administrator password, or the Administrator's password is the default 123456 or simply empty. This password is very dangerous and, therefore, in the installed system, please right-click "My Computer", select "Manage" and then select the left side of the "Computer Management (Local) System Tools Local Users and Groups user ", select the right window of the Administrator, right-click and select" Set Password. "
In the Open window, click "Continue" button, you can open the window for the Administrator password.
In addition, select "new user", set your username and password, and then double-click the new user, click the "subordinate" label, will in which all groups (if any) are selected, click the bottom of the "delete" button. And then click "Add" button, and then in the Open window, click the "Advanced" button, and then click "Find Now" button, find the PowerUser or User Group, click "OK" twice, and add the user PowerUser or User Group. Off the current user, and then the new user logs on can find the system much faster.
5 things: turn off the default shared
Windows installed, will create a number of hidden share, mainly for administrators to remotely log management systems to use, but for individual users, this rarely used, nor is it very safe. Therefore, we need to cut off this sharing: first in the d: the next new one disshare.bat file in which to write the following statement:
@ echo off
net share C $ / del
net share d $ / del
netshare ipc $ / del
net share admin $ / del
Next? Will be d: disshare.bat copied to the C: WINDOWSSystem32GroupPolicyUserScriptsLogon folder. And then press Win + R, type gpedit.msc, open window, expand "User Configuration Windows Settings Scripts (Logon / Logoff)" folder in the right pane, double-click the "Login", and in the shells out of the window, click the "Add" command, select the C: WINDOWSSystem32GroupPolicyUserScriptsLogon under disshare.bat file folder.
After completion of the settings, restart the system, will automatically cut off the Windows XP default shared channel, and if you have more hard drives, please net share d $ / del, under its own to add, such as the net share e $ / del, net share f $ / del, etc..
The first six events: Enable DMA transfer mode
Enable DMA mode, computer peripheral equipment (mainly referring to hard disk) can exchange data directly with memory, this can speed up the hard disk read and write speeds, higher data transfer rate: Open the "Device Manager", which "IDE ATA / ATAPI Controllers" under the "primary IDE channel" and "Secondary IDE channel", double-click the, click the "Advanced Settings", the dialog box lists the current IDE interface to connect the device transfer mode, click the List button on the "Transfer Mode "is set to" DMA (if available). " Restart the computer to take effect.
????????????????????
